Turning power on/off
Turning power on
1
Supply power to the power supplies <POWER 1> and <POWER 2> of each unit.
f Supply power to both power supply 1 <POWER 1> and power supply 2 <POWER 2>.
f The power indicator will light up when power is supplied.
Turning power off
1
Stop supplying power to the power supplies <POWER 1> and <POWER 2> of each unit.
f Stop supplying power to both power supply 1 <POWER 1> and power supply 2 <POWER 2>.
f The power indicator will go off when power is cut off.
@
NOTE
t Do not turn off the power when accessing the memory card or the Storage Module. Data in the memory card may be damaged.
t When the power is turned on, the unit boots with the same settings as were active when the power was turned off, with the exception of image data in
the VMEM (video memory). (Resume function)
Note that, in the following items, the changed settings will be backed up at approximately 60-second intervals in the non-volatile memory, and the
settings at the time of shutdown will be restored, but the settings changed within approximately 60 seconds before turning off the power may not be
updated. To update securely, do not change settings within approximately 60 seconds before turning off the power.
- Background wipe preset
- Key source preset
Chapter 4 Preparations — Turning power on/off
– 34 –