Key Wipe Transition - Panasonic Live Production Suite Series Operating Manual

3
Select [In Time]/[Out Time] in the R menu, and set [In Time]/[Out Time] in the encoder menu.
f Set the transition time. Set the transition time as with background transitions.
4
Select an item in [Type] in the [In/Out Sync] column.
[Separate]
[IN=OUT]
r Transition curve settings
1
Select the <ME1>/<ME2> button → [KEY1], [KEY2] → [Transition] tab.
2
Select the items in [MIX] and [WIPE] in the [Key Transition Curve] column.
f The transition curve can be set individually for each of MIX and WIPE according to the selection state of the transition type.
[Linear]
[S Soft]
[S Mid]
[S Hard]
Operations on the KEY operation section
r Operating the <KEY1 TRNS>, <KEY2 TRNS> buttons
Press the <KEY1 TRNS>, <KEY2 TRNS> buttons to execute a transition with the transition type and transition time of respective keys which have been
set on the menu.
The <KEY1 TRNS>, <KEY2 TRNS> buttons flicker during key in, and light when the transition is complete. If the <KEY1 TRNS>, <KEY2 TRNS> buttons
are pressed while key in is complete, transition of the key image (key out) is executed.
The <KEY1 TRNS>, <KEY2 TRNS> buttons light during key out, and go off when the transition is complete. If the <KEY1 TRNS>, <KEY2 TRNS>
buttons are pressed during the transition, the transition direction is reversed.

Key wipe transition

Set the pattern and position of key wipe transition on the menu.
1
Select the <ME1>/<ME2> button → [KEY1], [KEY2] → [Transition] tab.
2
Select an item displayed with a transition pattern icon, then select the wipe pattern.
Upper icon
Lower icon
3
Select an item in [WIPE] in the [In/Out Sync] column.
[Separate]
[IN=OUT]
4
Select [In Position]/[Out Position] in the R menu, and set [X-Pos] and [Y-Pos] in the encoder menu.
f Set the start position of the next pattern waveform.
- WIPE: 11, 12, 13, 14, 15
- SQ: 41, 42, 43, 44, 45, 46
5
Select an item in [Position] in the [In/Out Sync] column.
[Separate]
[IN=OUT]
r Pattern examples for wipe transition
Key in
Key out
Chapter 5 Basic Operations — KEY
Sets the [In Type] column and the [Out Type] column separately.
The [In Type] column setting becomes the same as the [Out Type] column setting.
Straight line
A shallow S curve
An intermediate S curve
A deep S curve
Select the wipe pattern for key in.
Select the wipe pattern for key out.
Sets the wipe patterns for [In] and [Out] separately.
Matches the wipe pattern of [Out] to the wipe pattern of [In].
Sets the start position of pattern waveform separately for key in and key out.
Sets the start position of pattern waveform for key out to the start position of pattern waveform for key in.
Pattern example 1 Pattern example 2 Pattern example 3
SQ
SQ
– 60 –
Pattern example 4
SQ
SQ