Assigning Signals To Buttons - Panasonic Live Production Suite Series Operating Manual

Assigning signals to buttons

External video input signals and internally generated signals can be assigned to the crosspoint buttons (the PGM/A, PST/B, KEY, and AUX bus
crosspoint buttons) in the crosspoint area. All buses in a single Control Panel have a common assignment.
If the assignment of the signals selected by the crosspoint buttons is changed, the positions of the lit crosspoint buttons will be changed according to the
changed assignment. In this case, the output video is not changed.
1
Select the <PANEL> button → [XPT ASSIGN] → [Panel1]/[Panel2]/[Panel3] tab.
[Panel1] tab
[Panel2] tab
[Panel3] tab
2
Select the buttons to assign the video sources from the button list in the left column.
f Select [Select] to filter the button list in the left column.
3
Select a signal to be assigned from the signal list in the right column.
f Select [Page Select] to filter the signal list in the right column.
f When [Auto Assign] is selected and set to [On]
- The signal is allocated to the button selected in step
4
Select [Assign].
f The signal selected in step
f When [Insert] is selected
- The signal selected in step
was originally assigned to the previous button.
- The setting of the button assigned to [ME1PGM], [ME2PGM] does not change.
f When [Delete] is selected
- The signal assigned to the button selected in step
r Signals that can be selected for the crosspoint buttons:
f "l" indicates selectable, and "―" indicates non-selectable.
Signal name
SDI IN1 - SDI IN20
IP IN1 - IP IN8
ME1KEYPVW, ME2KEYPVW
ME1PGM, ME2PGM
ME1PVW, ME2PVW
DSKPGM1, DSKPGM2
DSKPVW1, DSKPVW2
DSKEXT1-1, DSKEXT1-2,
DSKEXT2-1, DSKEXT2-2
ME1 CLN, ME2 CLN
Clip 1V, Clip 2V
Clip 1K, Clip 2K
Still 1V, Still 2V
Still 1K, Still 2K
CBGD1, CBGD2
CBAR
Black
MV1, MV2
2nd PAGE, 3rd PAGE
Blank
*1 Crosspoint buttons other than the <AUX 1/2> to <AUX 15/16> and <VMEM F/S> buttons.
*2 <AUX 1/2> to <AUX 15/16> and <VMEM F/S> buttons.
*3 ME1PGM, ME1CLN, ME2PGM and ME2CLN have a limitation on selection.
Ex) For each ME, it is not possible to select the PGM/CLN in the same ME. When ME1PGM is selected for ME2, ME2PGM cannot be selected for ME1.
*4 Used with the SHIFT function.
Chapter 7 Configuring Operations — Assigning signals to buttons
Assigns the control panel 1.
Assigns the control panel 2 (second Control Panel).
Assigns the control panel 3 (third Control Panel).
2
. The button selection destination automatically moves back by 1 place.
3
is assigned to the button selected in step
3
is assigned to the button selected in step
2
and the buttons after that will each shift one to forward. The last button will be Blank.
Description
SDI input signals 1 to 20
IP input signals 1 to 8
Key preview video signal
Program video signal
Preview video signal
DSK program video signal
DSK preview video signal
DSK extended signals
Clean video signals
Video memory (moving image) 1, 2 videos
Video memory (moving image) 1, 2 keys
Video memory (still image) 1, 2 videos
Video memory (still image) 1, 2 keys
Color background 1, 2
Color bar
Black image
MultiView display output signal
Page switching function
Not assigned
2
.
2
. The buttons after the button selected in step
ME*
1
l
―
l*
3
―
―
―
―
l* 3
l
l
l
l
l
l
l
―
l*
4
―
– 115 –
2
will be the signal that
AUX*
2
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l*
4
―