Connecting The Control Systems - Panasonic Live Production Suite Series Operating Manual

Connecting the control systems

Connecting the Live Production Suite system and the Control Panel AV-HS60C2/AV-HS60C4
Connect the <LAN1> terminal on each of the units and the <MAIN FRAME> terminal on the control panel using a LAN cable (CAT5E or better) via a
GbE hub.
Recommended cables: LAN cable (CAT5E or better) or straight cable, STP (Shielded Twisted Pair), maximum 100 m
r Connecting the control panel 2/3
Connection is possible with a LAN cable (CAT5E or better) via a GbE hub.
@ NOTE
t The serial port cannot be used with the control panel.
Connecting the Menu Panel AV-HS60C3
Connect the control panel and the optional Menu Panel AV-HS60C3.
NOTE
@
t A 1366×768 resolution DVI-D monitor and a USB mouse cannot be connected to the control panel.
t The <DVI-D> terminal and <USB> jack cannot be used with the Live Production Suite series.
Connecting a computer
By connecting from the network that is configured by the switcher system via LAN, you can control it from a web browser on a computer.
For details on the compatible OS and browser, refer to "Peripheral equipment requirements".
Computer settings
Set an IP address within the private address range for the connected computer that is different from each of the other units. Set the same address as
the subnet mask for each of the units.
Refer to "Network settings" for information about the network settings for each unit.
Web browser settings
Launch the web browser on the computer and enter the IP address for the switcher system. (Default value: 192.168.0.90)
The user name and password entered are set up beforehand on the Control Panel.
Set with <SYS> button → [System] → [Network] tab → [PC Access].
Chapter 2 Installation and Connection — Connection
– 16 –