Table of Contents
Advertisement
Format
Horizontal period
Line synchronizer range
Internally fixed delay
Standard output phase ± variable range
f The 1H indication is the calculated value for 1080/50i.
Phases and delay amount of input/output signals
Input signal
f For details on the frame synchronizer, refer to "Setting the frame synchronizer".
[Output Phase]
Input signal
Non-synchronized input
Output signal
f A=0 when the synchronizing signal (Reference) is either [BB] or [Tri-level sync]. A=75H when it is [BB Advanced].
f 1H is 1 line with 1080/50i (35.5 μs). With 2160/50p it is 4 lines.
f When DVE or Resizer is used as image effects on images, the delay is +1/25 s (1 frame in 1080/50i, 2 frames in 2160/50p).
f Images output to MultiView displays are delayed by +1/25 s (1 frame in 1080/50i, 2 frames in 2160/50p).
r Phase relationship between input and output signals
f With 1080/50i
Input signal
(Non-synchronized)
Sync signal (Reference)
Output signal
f With 2160/50p
Input signal
(Non-synchronized)
Sync signal (Reference)
Output signal
Chapter 8 System Menu — System settings
1080/50i
(1ME, 2ME configuration)
Approx. 35.5 μs
− 0.5H to + 0.5H (Approx. ±17.7 μs)
0.5H (Approx. ±17.7 μs)
1H ± 0.5H (Approx. 35.5 μs)
Frame synchronizer
［FS］ ： ［Off］ , ［On］
[System]
[1H]
[FS]
[Off]
Not possible
Phase
Reference − A + 1H
Delay amount
1H
F1
Max. of 1F-A
Max. of 1F-A
2160/50p
Approx. 17.7 μs
− 0.25H to + 0.25H (Approx. ±8.8 μs)
0.75H (Approx. ±26.6 μs)
1H ± 0.5H (Approx. 35.5 μs)
Image effects
[On]
Possible
Max. of 1F − A + 1H
F2
1F (frame)
F1
F2
1F (frame)
– 124 –
Output signal
[0H]
[On] (forced)
Reference − A
Max. of 1F − A
Advertisement
Table of Contents
