Mitsubishi Electric MELIPC MI5000 Series User Manual page 127

8.10
User Drive Initialization Function
This function deletes all folders and files stored on the user drive of this product.
• The event history file is not deleted because it is saved in system memory. To delete event history, clear the
event history.
• When the user drive is initialized, the parameters configured to this product are initialized. Default
parameters are configured after initialization.
• After the user drive is initialized, all folders and files under the user drive (/ROM) of the VxWorks part are
deleted. Backup necessary data in advance.
Operating procedure
Use an MELIPC memory operation of MI Configurator.
[Online][MELIPC memory operation]
Precautions
• Set the operating status of this product to STOP before initializing the user drive. If the status is RUN, an error occurs.
• If the power supply of this product is turned OFF to ON or the product is reset during user drive initialization, user drive
initialization may not be completed normally. Initialize the user drive again.
Data backup
The following shows the method to backup data of this product.
Target device
VxWorks part User drive (/ROM)
Destination
Storage on Windows part
Storage on an external device (another
personal computer)
8 DIAGNOSTIC AND MAINTENANCE FUNCTIONS
Method
Using the FTP server function or file sharing
server function of this product, copy the data
to the storage on Windows part through virtual
Ethernet.
Using the FTP server function or file sharing
server function of this product, copy data to
the storage on an external device through
Ethernet.
8.10 User Drive Initialization Function
8
125