Mitsubishi Electric MELIPC MI5000 Series User Manual page 221

Fonts are corrupted
Check item

Visual Studio cannot be installed
Check item
Did the message 'A setup package is either missing or damaged' appear
during the installation of Visual Studio?
A drive for CFast card does not appear
Check item
Is a partition set for the CFast card?
Is the partition format of the CFast card GTP?
Is a drive letter assigned to the partition of the CFast card?
An application error appears while running a user program
Check item
Is 'MELIPC Internal Communication' service running?
The drive of a media, such as an external HDD, is not displayed in
the explorer
Check item
Is a partition set for the media?
Is a drive letter assigned to the partition of the media?
An application cannot be installed on the Windows part
Check item
Is the Unified Write Filter enabled?
Corrective action
• Restart Windows.
• If the problem is not resolved even after restarting the Windows part, then
Windows font information may be corrupted. In that case, perform Windows
recovery. (MELIPC MI5000 Series User's Manual (Startup))
Corrective action
• Connect to the Internet, and then install Visual Studio.
• Contact Microsoft if installation fails after connecting to the Internet and
trying to install Visual Studio.
Corrective action
Select MBR for a partition format in the disk management of Windows to
initialize the disk.
Delete the configuration information from a CFast card in GPT format, and
initialize the card in MBR format.
For the initialization method of a CFast card, refer to the following manual.
MELIPC MI5000 Series User's Manual (Startup)
Assign a drive letter in the disk management of Windows.
Corrective action
• Start 'MELIPC Internal Communication' service in the "Service" screen of
Windows.
• Restart Windows.
If the above corrective actions cannot be performed, or the corrective actions
do not work, the file may be corrupted. In that case, perform Windows
recovery.
Corrective action
Initialize the disk in the disk management of Windows.
Assign a drive letter in the disk management of Windows.
Corrective action
Disable the Unified Write Filter and install an application.
For the setting method of the Unified Write Filter, refer to the following:
MELIPC MI5000 Series User's Manual (Startup)
Appendix 1 Troubleshooting by Symptom
A
APPX
219