Mitsubishi Electric MELIPC MI5000 Series User Manual page 200

APPENDIX
Appendix 1
If a function of this product does not perform properly, check the applicable items in the following and troubleshoot the error.
Classification
external appearance
communication
User program
File/folder access
Offline mode
CC-Link IE Field Network
CC-Link IE Field Network Basic
Date and time information
Individual reset function
MELIPC shutdown function
Network file access functions
Inter OS event notification function
APPX
198
Appendix 1 Troubleshooting by Symptom
Troubleshooting by Symptom
Description
Page 200 POWER LED of the power supply module turns off
Page 200 The MAIN LED is on, flashing, or off
Page 202 The LEDs of CC-Link IE Field Network are on, flashing, or off
Page 203 The LEDs of CC-Link IE Field Network Connector are on or off.
Page 204 Ethernet communications to the VxWorks part are not possible
Page 206 The serial communication cannot be established
Page 206 Ethernet communications to the Windows part are not possible
Page 207 Communication with a device connected to the Ethernet port (CH1) is not possible
Page 207 Virtual Ethernet communications are not possible
Page 207 An error occurs during user program execution
Page 208 File/folder access not possible
Page 208 Has hardware diagnoses completed?
Page 208 Windows recovery does not complete
Page 209 Initialization does not complete
Page 209 Cyclic transmission not possible
Page 209 Transient transmission not possible
Page 210 Disconnect stations
Page 210 Stations repeatedly disconnect and reconnect
Page 210 Communication is unstable
Page 211 The transmission status is disconnected or unconfirmed
Page 212 Cyclic data cannot be read correctly
Page 213 Transmission status repeats disconnection and reconnection
Page 214 Timeout occurs
Page 214 Slow link scan time
Page 214 Slow access to the product
Page 214 Master station cyclic transmission is stopped
Page 214 The date and time of the Windows part and VxWorks part are different
Page 215 The Time setting (SNTP client) function is not running normally
Page 215 A Windows-part forced-restart cannot be run
Page 215 Windows-part forced-restart is not complete
Page 215 Shutdown of this product is not complete
Page 216 An error occurs because there was an attempt to copy (or move) a file or folder to the
VxWorks part
Page 216 The name of a file or folder that was copied (moved) to the VxWorks part is garbled
Page 216 An error occurs because there was an attempt to create a new file or folder on the VxWorks
part
Page 216 If a new file or folder is created on the VxWorks part, a file or folder with a garbled name is
created
Page 216 It takes time to write files
Page 217 Inter OS event was not reported