Mitsubishi Electric MELIPC MI5000 Series User Manual page 261

No. Name
SD81 to Detailed information 1
SD111
SD81 to Detailed information 1
SD111
Content Details
Detailed information 1 Stores detailed information 1 for error code (SD0).
There are six types of information to be stored as shown in the following
figures:
• The type of detailed information 1 can be determined from SD80
"Detailed information 1 information category code". (The value of the
"Detailed information 1 information category code" stored in SD80
corresponds to (2), (4) to (6), (24) and (4100) shown below. )
■(2): Drive number and file name
SD81: With or without specification
• b0: Drive No.
• b1: File name
SD82: Drive No.
SD83 to SD90: File name (8 characters from Unicode text string
header)
■(4) Parameter information
SD81: With or without specification
• b0: Parameter type
• b1: Parameter storage destination
• b3: Parameter No.
• b4: Network No.
• b5: Station No.
• b6: System information
SD82(b0 to b7): Parameter type
• 1: Basic parameters
• 2: CC-Link IE Field Network Parameters
SD82(b8 to b15): Parameter storage location
• 4: User drive
SD83: Empty
SD84: Parameter No.
SD85: Network No.
SD86: Station No.
• 0 to 120 (0 for a master station)
Detailed information 1 ■(5) System configuration information
SD81: With or without specification
• b4: CPU No.
• b5: Network No.
• b6: Station No.
SD82: Empty
SD83: Blank (If not specified, this is '0'.)
SD84(b0 to b7): Blank (If not specified, this is '0'.)
SD84(b8 to b15): CPU No. (If not specified, this is "0xFF". )
SD85: Network No. (If not specified, this is '0'.)
SD86: Station No. (If not specified, this is '0'.)
• 0 to 120 (0 for a master station)
■(6) Frequency information
SD81: With or without specification
• b0: Number of times (set value)
SD82 to SD83: Number of times (If number of times (set value) is not
specified, this is '0'.)
• SD82: Lower word of the number of times (set value)
• SD83: Upper word of the number of times (set value)
■(24) Failure information
The failure information is a part of system information.
■(4100): Parameter information
SD81: With or without specification
• b0: Parameter type
• b1: Parameter storage destination
• b3: Parameter No.
• b4: Network No.
• b5: Station No.
• b6: System information
SD82(b0 to b7): Parameter type
• 2: CC-Link IE Field Network Parameters
SD82(b8 to b15): Parameter storage location
• 4: User drive
SD83: Empty
SD84: Parameter No.
SD85: Network No.
SD86: Station No.
• 0 to 120 (0 for a master station)
Set by (when to
set)
S (at error
occurrence)
S (at error
occurrence)
APPX
Appendix 6 List of Special Registers
A
259