Mitsubishi Electric MELIPC MI5000 Series User Manual page 73

■Relationship with parameters
Reserved station temporary clear is not reflected to "Network Configuration Settings" of "Basic Settings".
■If the master station has been reset or the power turned OFF
Temporary error disabled station setting is not reflected to "Network Configuration Settings" of "Basic Settings".
■If a station set as a temporary error disabled station is removed from the network
Resetting the master station product or turning the power OFF results in the following differences between the master station
and local station.
• ERR LED status
• 'Temporary error disabled station settings status' (SW00E0 to SW00E7)
If a difference occurs, return to normal status as in the procedure below.
1.
Reconnect the disconnected station.
2.
Carry out reserve station temporary clear settings, and remove temporary clear for the station to remove.
■Confirmation of station No. set in the error disabled stations.
Confirm the station No. set in the error disabled station in the "Enable/Disable Ignore Station Errors" window.
6 CC-Link IE Field Network FUNCTION
6.4 CC-Link IE Field Network diagnosis
6
71