Table of Contents
Advertisement
Safety Guidelines
This manual contains notices which you should observe to ensure your own personal safety, as well as to
protect the product and connected equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
Danger
!
indicates that death, severe personal injury or substantial property damage will result if proper precautions
are not taken.
Warning
!
indicates that death, severe personal injury or substantial property damage can result if proper precau-
tions are not taken.
Caution
!
with warning triangle, indicates that minor personal injury or property damage can result if proper precau-
tions are not taken.
Caution
without warning triangle, indicates that property damage can result if proper precautions are not taken.
Attention
indicates that an undesired result or state may occur if the note is not adhered to.
Note
draws your attention to particularly important information on the product, handling the product, or to a
particular part of the documentation.
Qualified Personnel
The device/system may only be set up and operated in conjunction with this manual.
Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are
defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and sys-
tems in accordance with established safety practices and standards.
Correct Usage
Note the following:
Warning
!
This device and its components may only be used for the applications described in the catalog or the
technical description, and only in connection with devices or components from other manufacturers which
have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed cor-
rectly, and operated and maintained as recommended.
Trademarks
MOBY
Some of the other designations used in these documentsare also registered trademarks; the owner's
rights may be violated if they are used by third parties for their own purposes.
Copyright E Siemens AG 2003 All rights reserved
The reproduction, transmission or use of this document or its
contents is not permitted without express written authority.
Offenders will be liable for damages. All rights, including rights
created by patent grant or registration of a utility model or design, are
reserved.
Siemens AG
Automation and Drives (A&D)
Systems Engineering
P.O. Box 2355, D-90713 Fuerth
Siemens Aktiengesellschaft
is a registered trademark of SIEMENS AG.
Disclaimer of Liability
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be pre-
cluded entirely, we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any necessary cor-
rections included in subsequent editions. Suggestions for improve-
ment are welcomed.
E Siemens AG 2003
Technical data subject to change.
Order No. J31069-D0155-U001-A0-7618
Advertisement
Table of Contents
