Siemens MOBY FC 56 Technical Description page 56

MOBY Commands
4.2.13 TRACE
Parameterizing the command in Command_DB
Table 4-21 UDT 50 "MOBY FH CMD" – TRACE
Address Name
0.0
+0.0 UID
+4.0 command
+5.0 sub_command_1
+6.0 sub_command_2
+7.0 sub_command_3
+8.0 Filename
+16.0 length
+20.0 address_MDS
+22.0 DAT_DB_number
+24.0 DAT_DB_address
+26.0 QUEUE_DB_number
+28.0 QUEUE_DB_address 0
=30.0
Acknowledgment data in the TRACE command
The user data contained in the acknowledgment of the TRACE command are
written to the address parameterized in the command.
4-26
Starting Commentary
Value
DW#16#0 MDS number, only MOBY U with multitag
'T' MDS command: T = Trace (absolute read)
B#16#0 Not used
B#16#0 Not used
B#16#0 Not used
'xxxxxxxx' Not used
L#1 Length in bytes of the data to be read
W#16#0 Physical start address of the data on the MDS
to be read
48 Data DB. The read data are written to this DB.
0 Address of the beginning of the user data in
the data DB
48 Not used
Not used
FC 56
J31069-D0155-U001-A0-7618