Mitsubishi Electric MELSEC iQ-R Series User Manual page 75

Receive data clear request procedure using Engineering tool
The following shows the method which uses "Intelligent Function Module Monitor" of Engineering tool.
For the operation method of the Intelligent Function Module Monitor function, refer to the following manual.
GX Works3 Operating Manual
Operating procedure
1.
Register C24 in "Intelligent Function Module Monitor".
2.
Set "CH Receive data clear request" of "Receiving end specification" to "Requested".
3.
The received data is cleared.
3 DATA COMMUNICATION USING NONPROCEDURAL PROTOCOL
3.1 Receiving Data from Target Device
3
73