Program 44 : ARS/F-Route Setup
44-07 : Gain Table for ARS/F-Route Access
44-07 : Gain Table for ARS/F-Route Access
Level:
IN
Description
Input Data
Conditions
Feature Cross Reference
918
Programming
•
Available.
Use Program 44-07 : Gain Table for ARS/F-Route Access to set the PAD table. If an extension
dials ARS/F-Route number;
•
The Extension Dial Gain Table is activated, which is assigned in Program 44-05.
•
The Extension Dial Gain Table follows "Outgoing transmit" and "Outgoing receive" settings.
If the incoming call is transferred to another line using ARS/F-Route;
•
The Tandem Gain Table is activated, which is assigned in Program 44-05.
•
The Tandem Gain Table follows the "Incoming transmit" and "Incoming receive" settings for
incoming line, and "Outgoing transmit" and "Outgoing receive" settings for the outgoing line.
Note:
For the ARS/F-Route call (in the above case), CODEC gain in Program 14-01-02 and
14-01-03 are not activated.
Gain Table Number
Item No.
01
Incoming Transmit
02
Incoming Receive
03
Outgoing Transmit
04
Outgoing Receive
None
•
Automatic Route Selection (ARS)/F-Route
Aspila EX
Item
1-500
Input Data
1-63
(-15.5 ...+15.5dB)
1-63
(-15.5 ...+15.5dB)
1-63
(-15.5 ...+15.5dB)
1-63
(-15.5 ...+15.5dB)
Aspila EX Software Manual
Default
32
32
32
32