Program 20 : System Option Setup
20-02 : System Options for Multi-Line Telephones
20-02 : System Options for Multi-Line Telephones
Level:
IN
Description
Input Data
Item
No.
01
Trunk Loop Key Operation Mode
02
Trunk Loop Access Key Operating
Mode
Use this option to set the operating mode
of the extension's trunk group keys. The
keys can be for incoming access, outgo-
ing access or both.
03
BLF Control
Set the conditions under which a Hot-
line, Reverse Voice Over or DSS Con-
sole key indicates that an extension is
busy. Refer to the Reverse Voice Over
feature for more information.
04
Retrieve the Line After Transfer
Enable (1) or disable (0) an extension's
ability to answer a call after it's been
transferred, but before it's answered.
05
Headset Busy Mode
Set the conditions under which a headset
extension is busy to incoming callers.
604
Programming
•
Available.
Use Program 20-02 : System Options for Multi-Line Telephones to set various system options
for Multi-Line Telephones.
Item
Aspila EX
Input Data
0- Indicate the Using Loop Trunk
1- Not indicated
Mode
0 : Keep
Lamp
Incoming:
300 IPM Red blink
Talking:
Green Light-
ing (on Talk-
ing TEL)
Holding:
60 IPM
Green blink
(on holding
TEL)
0- Outgoing / Incoming
1- Outgoing
2- Incoming
0- Idle / Busy (ON/OFF)
1- Busy / Idle (ON/OFF)
0- Not Holding
1- Holding
0=Headset busy with one CALL key busy
1=Headset busy with both CALL keys busy
Default
1 : Extinction
Extinction
(LED off)
Extinction
(LED off)
Aspila EX Software Manual
0
0
1
1
0