NEC ASPILA EX Feature Manual page 189

Default Setting
Programming
Aspila EX Software Manual
tion correctly. When connecting the DSS to a extension previously defined with another cir-
cuit type, undefine the circuit type (enter 00 in Program 10-03 for the extension number), then
connect the DSS Console.
(C.) To program the keys on a 24-Button DLS in Program 15-07, use the extension number to
which the DLS is installed and, regardless of the type of system phone connected, start pro-
gramming the DLS keys at key number 25.
• No 110-button DSS Consoles assigned (in Program 30-02).
• All 110-button DSS Console key ranges are DSS/One Touch for extension numbers 200-399.
• Once a 110-button DSS Console is enabled, the console's keys are DSS/One Touch keys (Pro-
gram 30-03).
• Once a 24-button console is attached the keys are Not Defined (Program 15-07).
•10-03-01 : PCB Setup
The system automatically assigns the terminal type (10) for the port which has a 110-button
DSS console installed.
•15-07-01 : Programming Function Keys
Assign function keys to the DSS consoles. When programming a 24-Button DSS key, use the
extension number to which the DSS is installed and, regardless of the type of system phone
connected, start programming the DSS keys at key number 25 (Key 25=DSS key 1).
•20-02-03 : System Options for System Telephones - BLF Control and
20-13-06 : Class of Service Options (Supplementary Service) - Automatic Off Hook Signal-
ing
These programs set the conditions under which a Hotline, Reverse Voice Over or DSS Con-
sole key indicates that an extension is busy. With condition 1 in the following chart, the BLF
LED is on only when both extension line appearances are busy. In conditions 2-4, the BLF
LED is on when one line appearance is busy.
Program 20-02-03
1 1
2 1
3 0
4 0
1
BLF is on for extension receiving a voice announced Intercom call
•20-06-01 : Class of Service for Extensions
Assign Class of Service (1-15) to extensions.
•30-01-01 : DSS Console Operating Mode
Set the mode of the system's 110-button DSS Consoles. The entry you make in this option
applies per 110-button DSS Consoles. The available options are Regular (Business) Mode (0),
Hotel Mode (1), and ACD Monitor Mode (2)
•30-02-01 : DSS Console Extension Assignment
Designate the 110-button DSS Console installations (i.e., the extensions that have 110-button
DSS Consoles assigned to them).
Direct Station Selection (DSS) Console
Program 20-13-06
0
1
0
1
1
BLF Busy
Status Status
Off No
On Yes
On Yes
On Yes
Features 175