NEC ASPILA EX Feature Manual page 73

Operation (Cont'd)
Aspila EX Software Manual
To dial an outside number and let your system tell you when an Account Code is
required:
1. Access a trunk and dial the number you want to call.
If you hear "stutter dial tone after dialing the number, ARS is requesting that you enter
an ARS Authorization Code. Refer to Automatic Route Selection (F-Route) (page 79)
for more information.
2. Wait for your call to go through.
OR
If you hear "Please enter an Account Code," and your display shows ENTER ACCOUNT
CODE:
• Dial *.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50)
• Dial your Account Code (1-16 digits, using 0-9 and #).
If Account Codes are hidden, each digit you dial will show an "*" character on the
telephone's display.
• Dial *.
OR
Press your Account Code key (PGM 15-07 or SC 851: code 50)
To enter an Account Code for an incoming call:
This procedure is not available at SLTs.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps will dial digits out
onto the connected trunk.
2. Dial *.
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be
Forced or Verified.
4. Dial *.
Account Codes
Features 59