Program 24 : Hold/Transfer Setup
24-02 : System Options for Transfer
24-02 : System Options for Transfer
Level:
IN
Description
Input Data
Item
No.
01
02
03
04
05
07
08
726
Programming
•
Available.
Use Program 24-02 : System Options for Transfer to define the system options for Transfer feature.
Item
Busy Transfer
Use this option to prevent or allow
extensions to Transfer calls to busy
extensions.
MOH or Ringback on Transferred
Calls
Use this option to enable or disable
MOH on Transfer. If enabled (0), a
transferred caller hears MOH while
their call rings the destination exten-
sion. If disabled (1), a transferred caller
hears ringback while their call rings the
destination extension.
Delayed Call Forwarding Time
If activated at an extension, Delayed
Call Forwarding occurs after this inter-
val. This also sets how long a Trans-
ferred call waits at an extension
forwarded to Voice Mail before routing
to the called extension's mailbox.
Transfer Recall Time
An unanswered transferred call recalls
to the extension that initially trans-
ferred it after this interval.
Message Wait Ring Interval Timer
For SLTs without message waiting
lamps, this timer determines the
amount of time between intermittent
ringing. If this timer is set to '0' then the
system rings once.
Forced release for Trunk-to-Trunk
Transfer
Delayed transfer timer for all extension
groups
Aspila EX
Input Data
0- Disable
1- Enable
0- Hold Tone
1- Ring Back Tone
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
Aspila EX Software Manual
Related
Default
Program
0
0
20-03-02
10
30
30
1800
10
11-11-28
11-11-29
15-07-59