System Timers For Did/Disa - NEC ASPILA EX Feature Manual

Program 25 : DID/DISA Setup

25-07 : System Timers for DID/DISA

25-07 : System Timers for DID/DISA
Level:
IN
Description
Input Data
Item
No.
01 DISA Dial Tone Time
After answering a DISA trunk, the system waits this
interval for the caller to dial the first digit of the DISA
password. If the caller fails to dial within this interval,
the system drops the call.
02 DID/DISA No Answer Time
A DISA caller can ring an extension for this interval
before the system sets the call as a Ring No Answer.
After this interval expires, the call follows the pro-
grammed Ring No Answer routing (set in Program
25-03 and 25-04).
03 Disconnect after DID/DISA re-transfer to IRG
04 Calling Time to Automatic answering Telephone set
05 Duration time for Guidance Message by Automatic
answering telephone set
06 Duration time for Guidance Message by ACI Talkie
07 DISA Conversation Warning Tone Time
Determine the length of time a DISA caller can talk
before the Long Conversation tone is heard.
08 DISA Long Conversation Disconnect
This timer determines how long the system will wait
before disconnecting a call after the Long Conversa-
tion tone is heard.
09 DISA Internal Paging Time
This is the maximum length of an Internal Page
placed by a DISA caller. If the Page continues longer
than this interval, the system terminates the DISA
call.
750 Programming
• Available.
Use Program 25-07 : System Timers for DID/DISA to set the value for the system timers which
affect DID and DISA. Refer to the following chart for a description of each option, its range and
default setting.
Item
Aspila EX
Input Data
0-64800
0-64800
0-64800
0-64800
0-64800
0-64800
0-64800
0-64800
0-64800
Aspila EX Software Manual
Related
Default
Program
10 25-04
30 25-04
60
10
10
10
180
10
30