NEC ASPILA EX Feature Manual page 585

Function
Number
*00 Not Used
*01 Trunk Key
*02 Trunk Group/Loop Key
*03 Virtual Extension Key
*04 Park Key
*05 Loop Keys
*06 Trunk Access Via Networking
*10 ACD Log – In / Log – Out
*11 ACD Conversation Recording
*12 ACD Emergency Call
*13 ACD Off Duty Mode
*14 ACD Start / End
*15 ACD Monitor Mode
*16 ACD Standby Mode
*17 ACD Work Time Mode
*18 ACD overflow Control
Conditions
Aspila EX Software Manual
Program 15 : Extension Basic Setup
[2] Appearance Function Level (*00 - *99) (Service Code 852)
Function
Trunk Number (001-200)
Trunk Group Number
(001-100)
Extension Number or Depart-
ment Group Number
Park Number (01 – 64)
•
•
•
Network System Number
(01-50)
ACD Group Number
When a key is programmed using service code 852, that key cannot be programmed with a function
using the 851 code until the key is undefined (000). For example with a Park Key programmed by
dialing 852 + *04 must be undefined by dialing 000 before it can be programmed as a Voice Over
key by dialing 851 + 48.
15-07 : Programmable Function Keys
Additional Data
0=Incoming + Trunk Group
Number (001-100)
1=Outgoing + Trunk Group
Number (001-100)
2=Both + Trunk Group
Number (001-100)
LED Indication
Red On: Under log-on
Off: Under log-off
Red On: Under recording
Slow Blink (Red): Pause
Emergency call
Red On: Under monitor, Override,
Standby
Red On: Under off duty
Slow Blink (Red): Under reservation
Red On: ACD operation end
Red On: Under monitor
Red On: Standby
Red On: Under work time
Slow Blink (Red): Under reservation
Red On: Enable
Slow Blink (Red): Disable
Programming 579