Pre-Ringing Setup - NEC ASPILA EX Feature Manual

Program 10 : System Configuration Setup

10-08 : Pre-Ringing Setup

10-08 : Pre-Ringing Setup
Level:
IN
Description
Input Data
Conditions
Feature Cross Reference
436 Programming
• Available.
Use Program 10-08 : Pre-Ringing Setup to enable or disable pre-ringing for trunk calls. This sets
how a trunk initially rings a telephone. With pre-ringing, a burst of ringing occurs as soon as the
trunk's LED flashes. The call then continues ringing with the normal ring cadence cycle. Without
pre-ringing, the call starts ringing only when the normal ring cadence cycle occurs. This may cause
a ring delay, depending on when call detection occurs in reference to the ring cycle.
None
• Central Office Calls, Answering
Aspila EX
Input Data Default
0: disable
1: enable
1
Aspila EX Software Manual