NEC ASPILA EX Feature Manual page 359

Hide thumbs Also See for ASPILA EX:
Table of Contents

Advertisement

Related Features
Aspila EX Software Manual
Service options. You cannot use Programs 20-06 thru 20-17 to assign Class of Service to tie
lines.
•34-03-01 : Trunk Group Routing for E&M Tie Lines
Use this program to assign the trunk group route (1-100) chosen when a user seizes a tie line
and dials 9. Set Trunk Group Routing in program 14-06. If the system has ARS, dialing 9
accesses ARS.
•34-04-01 : E&M Tie Line Toll Restriction Class
If the system uses Toll Restriction, enter a Toll Restriction Class (1-15) for each tie line. The
system uses the class you enter in Program 21-05. You cannot use Program 21-04 to assign
Toll Restriction to tie lines.
•34-05-01 : Tie Line Outgoing Call Restriction
This program lets you build a restriction matrix for trunk calls placed over a tie line. For each
tie line trunk group (1-100), enable (0) or disable (1) outgoing access to each CO trunk group.
•80-03-01 : DTMF Tone Receiver Setup
80-04-01 : Call Progress Tone Detector Setup
If required, modify the criteria for dial tone detection and call progress tone detection for tie
line calls.
•81-03-01 : 4TLIU Initial Data Setup
Make sure the Tie Line Timer settings are compatible with your local telco.
Automatic Route Selection/Trunk Group Routing
In a system with ARS enabled:
When a tie line user dials 9 for an outside call, the system routes the call via ARS.
In a system with ARS disabled:
When a tie line user dials 9 for an outside call, the system uses the routes programmed for
Trunk Group Routing.
Central Office Calls, Placing
Depending on programming, you can seize a tie line by:
Pressing a line key
Pressing a One-Touch Key
Dialing a trunk group code
Dial codes which directly accessing a specific tie line
Dial Tone Detection
Refer to this feature for the specifics on how the system handles Dial Tone Detection.
Long Conversation Cutoff
Long conversation cutoff is controlled separately for DISA and tie lines.
Networking
The Networking feature can use tie lines to connect the different networking nodes.
Toll Restriction
Incoming tie line calls can have a Toll Restriction class and can be subject to the system's toll
restriction.
Trunk Groups
To simplify placing calls over your tie lines, you can put the tie lines in a trunk group.
Tie Lines
Features
345

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents