Program 21 : Outgoing Call Setup; System Options For Outgoing Calls - NEC ASPILA EX Feature Manual

Program 21 : Outgoing Call Setup

21-01 : System Options for Outgoing Calls

Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
Level:
IN
Description
Input Data
Item
No.
01 Seizure Trunk Line Mode
02 Intercom Interdigit Time
When placing Intercom calls, extension users
must dial each digit within this interval.
03 Trunk Interdigit Time (External)
The system waits for this timer to expire
before placing the call in a talk state (Call
Timer starts after timer expires, Voice Over
and Barge-In are not allowed until after timer
expires).
04 Researched time for DTD circuit
05 Dial Tone Detection Time
If dial tone detection is enabled, the system
will wait this interval for the Telco to return
dial tone. When the interval expires, the sys-
tem assumes dial tone is not present. To dis-
able this timer (and have the system wait
continuously), enter 0.
06 Dial pause at first digit
07 Toll Restriction Override Time
After dialing the Toll Restriction Override
codes, the system removes Toll Restriction
from the extension for this interval.
08 Preset dial display hold time
09 Ringdown Extension Timer
A Ringdown extension automatically calls its
programmed destination after this interval.
10 Dial Digits for Toll Restriction Path control
11 Inter-Digit Time for Toll Restriction Path
control
654 Programming
• Available.
Use Program 21-01 : System Options for Outgoing Calls to set the system options for Outgoing
Call Service.
Item
Aspila EX
Input Data Default
0- Priority route
1- Circular route
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
0-64800 (Sec.)
0-24
0-60
Related Program
0 14-05
14-06
10
10 14-02-08
5 14-02-05
3
1
10 20-08-06
21-07
10
5 20-08-09
21-11
0
0
Aspila EX Software Manual