Toll Restriction Table Data Setup - NEC ASPILA EX Feature Manual

21-06 : Toll Restriction Table Data Setup

Level:
IN
Description
Input Data
Item
Item
No.
01 International call
restriction table
02 International call
permit code table
03 Maximum num-
ber digits table
assignment
04 Common permit
code table
05 Common
restriction table
06 Permit code table
Aspila EX Software Manual
21-06 : Toll Restriction Table Data Setup
• Available.
Use Program 21-06 : Toll Restriction Table Data Setup to set the system's Toll Restriction data.
Dial 1-9, 0, *, # can be entered in each table.
Table Input Data
1-10 Dial
(Up to 4 digits)
1-20 Dial
(Up to 6 digits)
1-4 4-30
1-10 Dial
(Up to 4 digits)
1-10 Dial
(Up to 12 digits)
1-4 Dial
(table) (Up to 12 digits)
1-60
(Entry)
Program 21 : Outgoing Call Setup
Aspila EX
Default
Table 1-10 =
No Setting
No Setting
Tables 1 - 4
= 30
Table 1 = 911
Table 2 = 1800
Table 3 = 1888
Tables 4 - 10 =
No Setting
Table 1 = 900
Table 2 = 1900
Table 3 = 976
Tables 4 - 10
= No Setting
Table 1 - 4 =
No Setting
Description
This option lets you program the Restrict
Table for international calls. The system
has 10 International Call Restrict Tables.
Each entry can be up to four digits long.
This option lets you program the Permit
Table for international calls. The system
has 20 International Call Permit Table.
Each entry can be up to six digits long,
using.
This option selects the maximum number
of digits allowed in outgoing calls for each
table.
This option lets you program the Common
Permit Code Table. This table contains up
to 10 codes you commonly allow users to
dial.
This option lets you program the Common
Restrict Code Table. This table contains up
to 10 codes you commonly prevent users
from dialing.
This option lets you program the Permit
Code Tables. If the system has Toll
Restriction enabled, users can dial num-
bers only if permitted by these tables and
the Common Permit Table (21-06-04).
There are four Permit Code Tables, with
up to 200 entries in each table. The system
permits calls exactly as you enter the code.
Programming 665