Call Waiting / Camp On - NEC ASPILA EX Feature Manual

Call Waiting / Camp On

Call Waiting / Camp On
• Available
Description
Conditions
Default Setting
Programming
Related Features
108 Features
With Call Waiting, an extension user may call a busy extension and wait in line (Camp-On) with-
out hanging up. When the user Camps-On, the system signals the busy extension with two beeps
indicating the waiting call. The call goes through when the busy extension becomes free. Call
Waiting helps busy extension users know when they have additional waiting calls. It also lets call-
ers wait in line for a busy extension without being forgotten.
None
Enabled.
• 11-12-47 : Service Code Setup (for Service Access) - Call Waiting Answer / Split Answer
for SLT
If required, use this program to change the code users dial to Split while on a call. This code is
normally 894.
• 15-07-01 : Programming Function Keys
Assign a function key for Camp-On (code 35). This key is also the Callback key.
• 20-18-06 : Service Tone Timer - Call Waiting Tone Timer
Use this option to set the interval between Call Waiting tones. This timer also sets the interval
between Off Hook Signaling alerts.
Callback
If an extension user Camps-On and then hangs up, the system converts the Camp On to a Callback.
Dual Line Appearance/Off Hook Signaling
If an extension busy on a call has Off Hook Signaling, an incoming Intercom calls rings the
idle second line appearance.
Off Hook Signaling
The Off Hook Signaling Enhancements give an extension the ability to block a caller from
dialing 804 to Camp On and/or DID callers from automatically camping on.
Programmable Function Keys
Function keys simplify Call Waiting/Camp On operation.
Transfer
An extension user may be able to Transfer a call to a busy extension.
Trunk Queuing/Camp-On
Trunk Queuing lets an extension user Camp-On to a trunk.
Aspila EX
Aspila EX Software Manual