Huawei 2288H V5 User Manual page 112

2288H V5 Server
User Guide
You can change an iBMC user password on the iBMC WebUI or CLI. The following
describes how to change a user password on the iBMC WebUI. For details about operations
on the iBMC CLI, see the
Procedure
Change the initial password of the default iBMC user.
Step 1 On the iBMC WebUI, choose Configuration > Local Users.
The Local Users page is displayed.
Step 2 Click
Figure 4-35 Local Users page
Step 3 Change the user password by following on-screen instructions.
A password must meet the following complexity requirements:
l
l
l
Issue 04 (2018-09-04)
NOTE
l The default iBMC user account is Administrator.
l U-Boot is a piece of underlying software used to configure basic settings, for example, initializing
hardware devices and setting up memory space mapping, to prepare for commissioning the OS.
l To ensure system security, change your initial password at your first login and change the password
periodically.
l A simple password is easy to crack, which makes the system vulnerable. You are advised to use a
password that meets complexity requirements or to enable the password complexity check function.
l The password complexity check function is enabled by default.
next to the user whose password is to be changed. See
Contains 8 to 20 characters.
Contains at least one space or one of the following special characters:
`~!@#$%^&*()-_=+\|[{}];:'",<.>/?
Contains at least two types of the following characters:
– Lowercase letters: a to z
– Uppercase letters: A to Z
– Digits: 0 to 9
Copyright © Huawei Technologies Co., Ltd.
Huawei Rack Server iBMC User Guide.
Figure 4-35.
4 Setup
103