Flexible Nic - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Step 7 The server automatically restarts for the TPM settings to take effect.
----End
Enabling the TCM
Step 1 Access the BIOS. For details, see
Step 2 Select Security.
Step 3 Select Trusted Platform Support and press Enter.
Step 4 Select Yes.
Step 5 Select TCM Enabled&Activated and press Enter.
Step 6 Select Yes.
Step 7 Press F10.
The Exit Saving changes? dialog box is displayed.
Step 8 Select Yes and press Enter.
Step 9 The server automatically restarts for the TCM settings to take effect.
----End

5.15 Flexible NIC

To install the flexible NIC, perform the following steps:
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove the drive module (see
Card
Issue 04 (2018-09-04)
Tray) above the NIC.
Copyright © Huawei Technologies Co., Ltd.
4.6.8 Configuring the
12 Preventing Electrostatic
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
Figure 5-57) or riser card module (see
5 Optional Part Installation
BIOS.
Discharge.
Server.
PSU.
Rails.
Cover.
3.12 Removing a Riser
166