Huawei 2288H V5 User Manual page 278

2288H V5 Server
User Guide
Step 1 Download the IRC package for windows kvm_client_mac.zip to the local PC and
decompress it.
The IRC package is available at
Step 2 Connect the local PC to the iBMC management network port of the server, and configure an
IP address for the client to enable communication between the client and the iBMC.
The IP address configured for the PC and the iBMC management network port IP address
must be in the same network segment.
Step 3 Open the console and set the folder where the IRC is stored as the working folder.
Step 4 Run the chmod 777 KVM.sh command to set the permission for the IRC.
Step 5 Run the ./KVM.sh command to start the IRC.
A dialog box similar to the one shown in
Figure 14-14 Login interface
Step 6 Enter the network address, user name, and password as instructed.
The network address can be in any of the following formats:
l
l
Step 7 Select a login mode, and click Connect.
l
l
Information shown in
Issue 04 (2018-09-04)
iBMC [IPv6 address]:Port number or iBMC IPv4address:Port number
Port number indicates the iBMC HTTPS port number.
For example, [2001::64]:444 or 192.168.100.1:444
The default port number 443 can be omitted.
iBMC domain name address:Port number
Shared Mode: allows two users to access and manage a server at a time. The two users
can see each other's operations.
Private Mode: allows only one user to access and manage a server at a time.
Figure 14-15
Copyright © Huawei Technologies Co., Ltd.
Independent Remote Console.
Figure 14-14
is displayed.
14 Common Operations
is displayed.
269