Removing The Air Duct - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide
Figure 3-13 Removing cables from a DC PSU
Step 4 Loosen and remove the screw from the ground hole using a Phillips screwdriver, and remove
the ground cable from the removed screw. See (3) in
----End

3.8 Removing the Air Duct

Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 If the server is configured with a full-height full-length riser card tray, remove it. For details,
see
Step 7 If the server is configured with a supercapacitor, disconnect the supercapacitor from the TFM.
See
Issue 04 (2018-09-04)
3.12 Removing a Riser Card
Figure 3-14.
Copyright © Huawei Technologies Co., Ltd.
Figure
12 Preventing Electrostatic
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
Tray.
3 Basic Operations
3-13.
Discharge.
Server.
PSU.
Rails.
Cover.
55