Huawei 2288H V5 User Manual page 179

2288H V5 Server
User Guide
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Take a spare drive module out of its ESD bag.
Step 7 Install the rear drive module in the chassis, and tighten the screws. See
Figure 5-60 Installing a two-slot drive module
Step 8 Install all drives in the drive module.
Step 9 Connect cables to the drive module. For details, see
Step 10 Install the chassis cover. For details, see
Step 11 Install the server. For details, see
Step 12 Connect the power cables. For details, see
Step 13 Power on the server. For details, see
Step 14 Log in to the iBMC WebUI, and check whether the new component is normal. For details, see
the
----End
Issue 04 (2018-09-04)
Huawei Rack Server iBMC User
Copyright © Huawei Technologies Co., Ltd.
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
7 Internal
3.5 Installing the Chassis
4.4 Installing the Server on Guide
5.4 PSU.
3.1 Powering On the
Guide.
5 Optional Part Installation
Server.
PSU.
Rails.
Cover.
Figure 5-60.
Cabling.
Cover.
Rails.
Server.
170