Dvd Drive - Huawei 2288H V5 User Manual

2288H V5 Server
User Guide

5.6 DVD Drive

To install a DVD drive, perform the following steps:
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Remove the air duct or the built-in drive assembly. For details, see
Duct
Step 7 Remove all fan modules. For details, see
Step 8 Press and hold down the latches on both sides of a fan module bracket, and lift the fan module
bracket. See
Figure 5-27 Removing a fan module bracket
Step 9 Take a spare DVD drive out of its ESD bag.
Step 10 Tighten two M2 flat-head screws using the Phillips screwdriver to secure the plastic latch to
the DVD drive. See (1) in
Issue 04 (2018-09-04)
or 3.10 Removing the Built-in Drive
Figure 5-27. Use the same method to lift the other fan module bracket.
Figure
Copyright © Huawei Technologies Co., Ltd.
12 Preventing Electrostatic
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
Assembly.
3.6 Removing a Fan
5-28.
5 Optional Part Installation
Discharge.
Server.
PSU.
Rails.
Cover.
3.8 Removing the Air
Module.
135