Huawei 2288H V5 User Manual page 118

2288H V5 Server
User Guide
If there are multiple boot devices of the same type, you can configure the boot sequence. The
following uses PXE as an example. For details about setting other types of devices as boot
options, see the
Step 1 Choose Advanced > PXE Configuration, and press Enter.
The PXE Configuration screen is displayed, as shown in
Figure 4-40 PXE Configuration
Step 2 Select the network port to be configured and press Enter.
Step 3 Select Enabled in the displayed dialog box, and press Enter.
----End
Set the BIOS password.
Step 1 Select Security.
The Security screen is displayed, as shown in
Issue 04 (2018-09-04)
Huawei Server Purley Platform BIOS Parameter
NOTE
l The PXE Configuration screen provides configuration of up to four on-board network ports. The
default value is Enabled for PXE1, and PXE3, and Disabled for other network ports.
l The PXE settings for the I/O network card are also displayed.
NOTE
To disable a network port, select Disabled and press Enter.
Copyright © Huawei Technologies Co., Ltd.
Reference.
Figure 4-40.
Figure 4-41.
4 Setup
109