Huawei 2288H V5 User Manual page 54

2288H V5 Server
User Guide
2.
3.
Step 5 Loosen the M6 screw from the lowest square hole at the rear of a guide rail. See (1) in
3-4.
Step 6 Remove the two plugs from the middle square holes on both ends. See (2) in
Step 7 Remove the guide rail from the cabinet.
1.
2.
3.
Issue 04 (2018-09-04)
Figure 3-3 Removing the server
Pull out the server along the guide rails away from the cabinet. See (2) in
Place the removed server on an ESD platform.
Tilt the guide rail to unhook it from the front mounting bar. See (3) in
Retract the guide rail. See (4) in
Rilt the guide rail to unhook it from the rear mounting bar, and remove it from the
cabinet.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-4.
3 Basic Operations
Figure 3-3.
Figure
Figure 3-4.
Figure 3-4.
45