Huawei 2288H V5 User Manual page 91

Table of Contents

Advertisement

2288H V5 Server
User Guide
Step 3 Number the new network cable.
l
l
Step 4 Route the new network cable in the same way (underfloor or overhead) as the network cable
to be replaced.
l
l
l
l
Step 5 Remove the network cable to be replaced.
Step 6 Install the new network cable.
l
l
Figure 4-15 Connecting a network cable
Step 7 Connect the other end of the network cable to the peer network port according to the network
plan.
l
l
Step 8 Check that the new network cable is functioning properly.
Power on the device, and ping the peer device connected by the new network cable. If the
peer device cannot be pinged, check whether the network cable is damaged or the connectors
are securely connected.
Step 9 Bind the new network cable with other cables.
Issue 04 (2018-09-04)
The number of the new network cable must be the same as that of the old one.
Use the same type of labels for network cables. Record the name and number of the local
device on one side of a label and those of the peer device on the other side. Attach a label
2 cm (0.79 in.) away from the end of a network cable.
Underfloor cabling is recommended because it is tidy and easy to route. Route cables in
the cabinet based on the installation requirements. You are advised to arrange new cables
in the same way as existing cables. Ensure that cables are routed neatly and undamaged.
Separate network cables from power cables when routing.
The minimum bend radius of a network cable is 4 cm (1.57 in.). Check that the cable
insulation layer is intact. Ensure that cables are routed for easy maintenance and capacity
expansion.
Bind cables with ties when routing. Ensure that optical cables are routed straightly and
bound neatly and that cable ties are installed at even spacing and fastened properly.
Connect the new network cable to the same port as the removed one.
Install the network cable in the network port securely.
Connect the new network cable to the same port as the removed one.
Install the network cable in the network port securely.
Copyright © Huawei Technologies Co., Ltd.
4 Setup
82

Advertisement

Table of Contents
loading

This manual is also suitable for:

V100r005

Table of Contents