(M) Monitor display and monitor output signal
Monitor description list (Pr.54, Pr.158)
• Set Pr.54 FM terminal function selection for the monitor to be output to the terminal FM (pulse train output).
• Set Pr.158 AM terminal function selection for the monitor to be output to the terminal AM (analog voltage
output). Output with a negative sign can be made (-10 VDC to +10 VDC) from the terminal AM.
output] indicates the output value is negative at the terminal AM. (For setting of the output with/without minus sign, refer to
page
347.)
• Refer to the following table and set the monitor to be displayed. (Refer to
Monitor item
Output frequency
Output current
Output voltage
Frequency setting value
Running speed
Motor torque
Converter output voltage
Regenerative brake duty
Electronic thermal O/L
relay load factor
Output current peak value
Converter output voltage
peak value
Input power
Output power
Load meter
Motor excitation current
Reference voltage output
Motor load factor
Torque command
Torque current command
Motor output
Torque monitor (power
driving/regenerative
driving polarity switching)
—
Energy saving effect
PID set point
PID measured value
PID deviation
Motor thermal load factor
Inverter thermal load
factor
PID measured value 2
358
PARAMETERS
Pr.54 (FM)
Increment
Pr.158 (AM)
and unit
setting
0.01 Hz
1
0.01 A/0.1 A
2
0.1 V
3
0.01 Hz
5
1 (r/min)
6
0.1%
7
0.1 V
8
0.1%
9
0.1%
10
0.01 A/0.1 A
11
0.1 V
12
0.01 kW/
13
0.1 kW
0.01 kW/
14
0.1 kW
0.1%
17
0.0 1 A/0.1 A
18
—
21
0.1%
24
0.1%
32
0.1%
33
0.01 kW/
34
0.1 kW
0.1%
36
—
46
Changeable by
parameter
50
setting
0.1%
52
0.1%
53
0.1%
54
0.1%
61
0.1%
62
0.1%
67
page 348
for the monitor description.)
Terminal FM/AM
Negative
Full-scale value
(-) output
Pr.55
Pr.56
1000 V
Pr.55
Value is Pr.55 converted
by Pr.37, Pr.144. (Refer
to
page
345.)
Pr.866
1000 V
Brake duty decided by
Pr.30 and Pr.70.
Electronic thermal O/L
relay operation level
(100%)
Pr.56
1000 V
Inverter rated power 2
Inverter rated power 2
Pr.866
Pr.56
—
200%
Pr.866
Pr.866
Rated motor capacity
Pr.866
—
Inverter capacity
100%
100%
100%
Motor thermal
operation level (100%)
Inverter thermal
operation level (100%)
100%
in the [Negative (-)
REMARKS
Refer to
page 345
running speed monitor.
Terminal FM:
1440 pulses/s is output when
Pr.291 = 0,1.
50k pulses/s is output when
Pr.291 ≠ 0,1.
Terminal AM: output is 10 V.
For manufacturer setting. Do
not set.
Regarding the energy saving
monitor, refer to
page 365
Refer to
page 497
control.
Output with a negative sign
(terminal AM)
for the
for the PID