Mitsubishi Electric 800 Series Instruction Manual page 425

(C) Motor constant parameters
Setting the applied motor
• Refer to the following list and set the parameters according to the applied motor.
Pr.71 Pr.450
0
(Pr.71 initial Standard motor
value)
1 Constant-torque motor
Standard motor
2 ―
Adjustable 5 points V/F (Refer to
30 Vector control dedicated motor
8090 IPM motor
9090 SPM motor
3 (4) Standard motor

13 (14) Constant-torque motor

33 (34) Vector control dedicated motor

8093 (8094) IPM motor

9093 (9094) SPM motor

5 Standard motor
15 Constant-torque motor
6 Standard motor
16 Constant-torque motor
9999
― (initial No second applied motor
value)

For the FR-A860-01080 or lower.

For the FR-A860-01440 or higher.

The same operation is performed for the both settings.
NOTE
• Regardless of the Pr.71 (Pr.450) setting, offline auto tuning can be performed according to Pr.96 (Pr.463) Auto tuning
setting/status. (Refer to
424
PARAMETERS
Motor
Pr.82 (Pr.455) and Pr.859 (Pr.860)
• 0 to 500 A, 9999 (0.01 A)
• 0 to 3600 A, 9999 (0.1 A)
Pr.90 (Pr.458) and Pr.91 (Pr.459)
• 0 to 50 Ω, 9999 (0.001 Ω)
• 0 to 400 mΩ, 9999 (0.01 mΩ)
Pr.92 (Pr.460) and Pr.93 (Pr.461)
(Induction motor)
page 598.)
• 0 to 6000 mH, 9999 (0.1 mH)
• 0 to 400 mH, 9999 (0.01 mH)
Pr.92 (Pr.460) and Pr.93 (Pr.461)
(PM motor)
• 0 to 500 mH, 9999 (0.01 mH)
• 0 to 50 mH, 9999 (0.001 mH)
Pr.94 (Pr.462)
• 0 to 100%, 9999(0.1%)
• 0 to 100%, 9999(0.01%)
Pr.706 (Pr.738)
• 0 to 5000 mV/(rad/s), 9999 (0.1 mV/(rad/s))
Pr.82 (Pr.455), Pr.859 (Pr.860),
Pr.90 (Pr.458), Pr.91 (Pr.459),
Pr.92 (Pr.460), Pr.93 (Pr.461),
Pr.94 (Pr.462) and Pr.706 (Pr.738)
• Internal data value 0 to 65534, 9999 (1)
The display increment can be changed in
Pr.684.
Star
connection
Delta
connection
page 426 for offlne auto tuning.)
Constant value range when
performing offline auto tuning
(increment)










Pr.82 (Pr.455) and
Pr.859 (Pr.860)
• 0 to 500 A, 9999 (0.01 A)
• 0 to 3600 A, 9999 (0.1 A)
Pr.90 (Pr.458) and
Pr.91 (Pr.459)
• 0 to 50 Ω, 9999 (0.001 Ω)
• 0 to 400 mΩ, 9999 (0.01 mΩ)
Pr.92 (Pr.460) and
Pr.93 (Pr.461)
• 0 to 50 Ω, 9999 (0.001 Ω)
• 0 to 3600 mΩ, 9999 (0.1 mΩ)
Pr.94 (Pr.462)
• 0 to 500 Ω, 9999 (0.01 Ω)
• 0 to 100 Ω, 9999 (0.01 Ω)
Operational
characteristic of the
electronic thermal O/L
relay
Constant-
Standard
torque






















