Mitsubishi Electric 800 Series Instruction Manual page 82

Pr.
Pr. Name
group
Terminal 4
126 T042 frequency setting
gain frequency
User group read
160 E440
selection
PID display bias
934 A630
coefficient
PID display bias
934 A631
analog value
PID display gain
935 A632
coefficient
PID display gain
935 A633
analog value
PU contrast
991 E105
adjustment
PM parameter
998 E430
initialization
Automatic
999 E431
parameter setting
Second PID display
1136 A670
bias coefficient
Second PID display
1137 A671
bias analog value
Second PID display
1138 A672
gain coefficient
Second PID display
1139 A673
gain analog value

Initial value for the FR-A860-00027.

Initial value for the FR-A860-00061.

Initial value for the FR-A860-00090 and FR-A860-00170.

Initial value for the FR-A860-00320 or higher.

For the FR-A860-01080 or lower.

For the FR-A860-01440 or higher.

The initial value for the FR-A860-00027 is set to the 85% of the inverter rated current.

Initial value for the FR-A860-00170 or lower.
Frequently-used parameters (simple mode parameters)
Unit Initial value Range
0.01 Hz 60 Hz 0 to 590 Hz
1 0 0, 1, 9999
0 to 500,
0.01 9999
9999
0.1% 20% 0 to 300%
0 to 500,
0.01 9999
9999
0.1% 100% 0 to 300%
1 58 0 to 63
0, 8009,
1 0 8109, 9009,
9109
1, 2, 10, 11,
1 9999 12, 13, 20,
21, 9999
0 to 500,
0.01 9999
9999
0.1% 20% 0 to 300%
0 to 500,
0.01 9999
9999
0.1% 100% 0 to 300%
Application
Allows the frequency at the maximum current
input (20 mA in the initial setting) to be
changed.
Restricts the parameters that are read by the
operation panel and parameter unit.
Adjust the bias value and the gain value that
are displayed in relation to PID control.
Contrast adjustment of the operation panel and
the parameter unit can be performed.
Selects the PM sensorless vector control and
set the parameters that are required to drive an
PM motor.
Changes parameter settings as a batch. The
target parameters include communication
parameters for the Mitsubishi Electric human
machine interface (GOT) connection and the
parameters for the rated frequency settings of
50 Hz/60 Hz.
Adjust the bias value and the gain value that
are displayed in relation to second PID control.
BASIC OPERATION
Refer
to
page
91,
402
259
501
248
145
255
501
4
81