NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Remove the screw that secures the optical-drive assembly to the base cover.
2. Using a plastic scribe, push the optical drive through the screw hole to release the optical-drive assembly.
3. Slide the optical-drive assembly out of the optical-drive bay.
1. optical-drive assembly
3. plastic scribe
4. Remove the screws that secure the optical-drive bracket to the optical drive.
5. Remove the optical-drive bracket.
12
Removing the optical drive
Removing the optical drive
computer. After working inside your computer, follow the instructions in
2. M2x4 screw
4. base cover
3
After working
www.dell.com/