NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Place the status-light board into the slot on the palm rest and keyboard assembly.
2. Press down the status-light board until it snaps into place.
3. Adhere the status-light board cable to the palm rest and keyboard assembly.
4. Slide the status-light board cable into the connector on the system board and close the latch to secure the cable.
Post-requisites
Steps
1. Replace the battery.
2. Replace the
hard
drive.
3. Replace the
I/O
board.
4. Replace the
base
cover.
5. Replace the
optical
drive.
Replacing the status-light board
computer. After working inside your computer, follow the instructions in
www.dell.com/
Replacing the status-light board
22
After working
41