NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Connect the display cable to the display-panel connector at the back of the display panel.
2. Adhere the tape that secures the display cable to the back of the display panel.
3. Place the display panel gently on the display back-cover.
4. Align the screw holes on the display panel with the screw holes on the display back-cover.
5. Replace the screws that secure the display panel to the display back-cover.
Post-requisites
Steps
1. Replace the
display
bezel.
2. Replace the
display
assembly.
3. Replace the
base
cover.
4. Replace the
optical
drive.
66
Replacing the display panel
Replacing the display panel
computer. After working inside your computer, follow the instructions in
38
After working
www.dell.com/