NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the
display
assembly.
Procedure
Steps
1. Using a plastic scribe, carefully pry up the inside edge of the display bezel.
2. Remove the display bezel off the display back-cover.
a. display back-cover
b. display bezel
c. plastic scribe
60
Removing the display bezel
Removing the display bezel
computer. After working inside your computer, follow the instructions in
33
After working
www.dell.com/