NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the
display
assembly.
4. Remove the
display
bezel.
Procedure
Steps
1. Remove the screws that secure the display panel to the display back-cover.
2. Lift the display panel gently and turn it over.
a. M2x3 screws (4)
b. display panel
c. display back-cover
3. Peel the tape adhering the display cable to the back of the display panel.
4. Lift the latch and disconnect the display cable from the display-panel cable connector.
64
Removing the display panel
Removing the display panel
computer. After working inside your computer, follow the instructions in
37
After working
www.dell.com/