NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Align the screw holes on the battery with the screw holes on the palm rest and keyboard assembly.
2. Replace the screw that secures the battery to the palm rest and keyboard assembly.
3. Align the screw holes on the battery bracket with the screw holes on the system board and palm rest and keyboard
assembly.
4. Replace the screws that secure the battery bracket to the system board and palm rest and keyboard assembly.
Post-requisites
Steps
1. Replace the
hard
drive.
2. Replace the
I/O
board.
3. Replace the
base
cover.
4. Replace the
optical
drive.
38
Replacing the battery
Replacing the battery
computer. After working inside your computer, follow the instructions in
20
After working
www.dell.com/