NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the
display
assembly.
4. Remove the
display
bezel.
Procedure
Steps
1. Using a plastic scribe, pry the camera module from the display assembly.
2. Lift the camera off the display assembly.
3. Disconnect the camera cable from the camera module.
1. plastic scribe
3. camera cable
62
Removing the camera
Removing the camera
computer. After working inside your computer, follow the instructions in
2. camera module
4. display assembly
35
After working
www.dell.com/