NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
3. Remove the
display
assembly.
4. Remove the
display
bezel.
5. Remove the
display
panel.
6. Remove the
display
hinges.
Procedure
Steps
1. Disconnect the camera cable from the connector on the camera module.
2. Peel off the tape that secures the camera cable to the display back-cover.
3. Peel off the tape that secures the display cable to the display back-cover.
4. Note the display cable routing and remove the display cable from the display back-cover.
1. display back-cover
3. tapes (2)
70
Removing the display cable
Removing the display cable
computer. After working inside your computer, follow the instructions in
2. display cable
4. camera module
41
After working
www.dell.com/