Chapter 16: Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 15 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

Steps
1. Using the alignment posts, place the I/O board on the palm rest and keyboard assembly.
2. Align the screw hole on the I/O board with the screw hole on the palm rest and keyboard assembly.
3. Replace the screw that secures the I/O board to the palm rest and keyboard assembly.
4. Connect the I/O board-cable to the system board and close the latch to secure the cable.

Post-requisites

Steps
1. Replace the base cover.
2. Replace the optical drive.
32 Replacing the I/O board
Replacing the I/O board
computer. After working inside your computer, follow the instructions in
16
After working
www.dell.com/