NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Place the palm rest and keyboard assembly on the display assembly.
2. Using the alignment posts, press the display hinges down on the palm rest and keyboard assembly.
3. Replace the screws that secure the display hinges to the palm rest and keyboard assembly.
4. Route the display cable through the routing guides on the palm rest and keyboard.
5. Slide the display cable to the connector on the system board and close the latch to secure the cable.
6. Slide the battery cable to the connector on the system board.
Post-requisites
Steps
1. Replace the
wireless
card.
2. Replace the
optical
drive.
3. Replace the
base
cover.
Replacing the display assembly
computer. After working inside your computer, follow the instructions in
After working
www.dell.com/
Replacing the display assembly
32
59