NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Connect the camera cable to the camera module.
2. Using the alignment post adhere the camera module on the display assembly and snap it into place.
Post-requisites
Steps
1. Replace the
display
bezel.
2. Replace the
display
assembly.
3. Replace the
base
cover.
4. Replace the
optical
drive.
computer. After working inside your computer, follow the instructions in
Replacing the camera
36
After working
www.dell.com/
Replacing the camera
63