NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
Steps
1. Remove the
optical
drive.
2. Remove the
base
cover.
Procedure
Steps
1. Use your fingertips to carefully spread apart the securing-clips on each end of the memory-module slot until the memory
module pops up.
2. Remove the memory module from the memory-module slot.
a. securing clips (2)
18
Removing the memory modules
Removing the memory modules
computer. After working inside your computer, follow the instructions in
7
After working
www.dell.com/