NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
Steps
1. Route the display cable through the routing guides on the display back-cover.
2. Adhere the tapes that secure the display cable to the display back-cover.
3. Slide the camera cable into the connector on the camera module to secure the cable.
Post-requisites
Steps
1. Replace the
display
hinges.
2. Replace the
display
panel.
3. Replace the
display
bezel.
4. Replace the
display
assembly.
5. Replace the
base
cover.
6. Replace the
optical
drive.
72
Replacing the display cable
Replacing the display cable
computer. After working inside your computer, follow the instructions in
42
After working
www.dell.com/